Wi-Fi Network Management on macOS

Deploy and manage comprehensive Wi-Fi network configurations across your Roundfleet devices. This tutorial covers network policy management, security configurations, proxy settings, DNS management, and enterprise-grade network deployment strategies.

Understanding macOS Network Management

macOS provides powerful command-line tools for network management:

networksetup - Primary tool for network configuration
airport - Advanced Wi-Fi scanning and management
scutil - System configuration utility for network settings
Network profiles - Enterprise policy-based network management

Basic Wi-Fi Operations

Enable/Disable Wi-Fi Interface

#!/bin/bash

# Enable Wi-Fi interface
enable_wifi() {
    echo "Enabling Wi-Fi interface..."
    networksetup -setairportpower en0 on
    
    if [[ $? -eq 0 ]]; then
        echo "✅ Wi-Fi interface enabled successfully"
        return 0
    else
        echo "❌ Failed to enable Wi-Fi interface"
        return 1
    fi
}

# Disable Wi-Fi interface
disable_wifi() {
    echo "⚠️  Disabling Wi-Fi interface..."
    echo "Ensure device has alternative connectivity (Ethernet, etc.)"
    
    networksetup -setairportpower en0 off
    
    if [[ $? -eq 0 ]]; then
        echo "✅ Wi-Fi interface disabled successfully"
        return 0
    else
        echo "❌ Failed to disable Wi-Fi interface"
        return 1
    fi
}

# Usage
enable_wifi
# disable_wifi

Turn Wi-Fi Service On/Off

#!/bin/bash

# Turn Wi-Fi service on (user can still control from menu bar)
turn_wifi_on() {
    echo "Turning Wi-Fi service on..."
    networksetup -setnetworkserviceenabled Wi-Fi on
    
    if [[ $? -eq 0 ]]; then
        echo "✅ Wi-Fi service turned on"
        return 0
    else
        echo "❌ Failed to turn Wi-Fi service on"
        return 1
    fi
}

# Turn Wi-Fi service off (user can still control from menu bar)
turn_wifi_off() {
    echo "Turning Wi-Fi service off..."
    networksetup -setnetworkserviceenabled Wi-Fi off
    
    if [[ $? -eq 0 ]]; then
        echo "✅ Wi-Fi service turned off"
        return 0
    else
        echo "❌ Failed to turn Wi-Fi service off"
        return 1
    fi
}

# Check Wi-Fi service status
check_wifi_service() {
    echo "Checking Wi-Fi service status..."
    local status
    status=$(networksetup -getnetworkserviceenabled Wi-Fi)
    
    echo "Wi-Fi service status: $status"
    return 0
}

# Usage
check_wifi_service
turn_wifi_on

Wi-Fi Network Information

Get Current Network Information

#!/bin/bash

# Get current Wi-Fi network SSID
get_current_network() {
    echo "=== Current Wi-Fi Network ==="
    local network_info
    network_info=$(networksetup -getairportnetwork en0)
    
    if [[ "$network_info" == *"not associated"* ]]; then
        echo "❌ Not connected to any Wi-Fi network"
        return 1
    else
        echo "📶 $network_info"
        return 0
    fi
}

# Get comprehensive Wi-Fi information
get_wifi_info() {
    echo "=== Wi-Fi Network Information ==="
    networksetup -getinfo Wi-Fi
    
    echo -e "\n=== Wi-Fi Interface Details ==="
    ifconfig en0 | grep -E "(inet |ether |status)"
    
    echo -e "\n=== Wi-Fi Quality ==="
    /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I
}

# Get available networks
scan_networks() {
    echo "=== Available Wi-Fi Networks ==="
    /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -s
}

# Usage
get_current_network
echo ""
get_wifi_info
echo ""
scan_networks

Advanced Network Diagnostics

#!/bin/bash

# Comprehensive network diagnostics
network_diagnostics() {
    echo "=== Roundfleet Network Diagnostics ==="
    echo "Timestamp: $(date)"
    echo "Hostname: $(hostname)"
    echo "======================================="
    
    # Wi-Fi interface status
    echo -e "\n🔍 Wi-Fi Interface Status:"
    local wifi_power
    wifi_power=$(networksetup -getairportpower en0)
    echo "Power: $wifi_power"
    
    local wifi_service
    wifi_service=$(networksetup -getnetworkserviceenabled Wi-Fi)
    echo "Service: $wifi_service"
    
    # Current connection
    echo -e "\n📶 Current Connection:"
    networksetup -getairportnetwork en0
    
    # Network configuration
    echo -e "\n⚙️  Network Configuration:"
    networksetup -getinfo Wi-Fi
    
    # DNS settings
    echo -e "\n🌐 DNS Settings:"
    networksetup -getdnsservers Wi-Fi
    
    # Proxy settings
    echo -e "\n🔒 Proxy Settings:"
    networksetup -getwebproxy Wi-Fi
    networksetup -getsecurewebproxy Wi-Fi
    networksetup -getautoproxyurl Wi-Fi
    
    # Signal quality
    echo -e "\n📊 Signal Quality:"
    /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I | grep -E "(SSID|BSSID|RSSI|noise|CC|channel)"
    
    # Connectivity test
    echo -e "\n🌍 Connectivity Test:"
    if ping -c 3 8.8.8.8 >/dev/null 2>&1; then
        echo "✅ Internet connectivity: Available"
    else
        echo "❌ Internet connectivity: Failed"
    fi
    
    if ping -c 3 apple.com >/dev/null 2>&1; then
        echo "✅ DNS resolution: Working"
    else
        echo "❌ DNS resolution: Failed"
    fi
}

# Generate network report
generate_network_report() {
    local report_file="/tmp/network_report_$(date +%Y%m%d_%H%M%S).txt"
    
    echo "Generating network report: $report_file"
    network_diagnostics > "$report_file"
    
    echo "📄 Network report saved: $report_file"
    return 0
}

# Usage
network_diagnostics

Enterprise Wi-Fi Management System

#!/bin/bash

# Roundfleet Enterprise Wi-Fi Management System
# Centralized Wi-Fi configuration and policy management for fleet devices

# Configuration
LOG_FILE="/var/log/roundfleet_wifi.log"
CONFIG_DIR="/etc/roundfleet/wifi"
PROFILES_DIR="$CONFIG_DIR/profiles"
POLICIES_DIR="$CONFIG_DIR/policies"
BACKUP_DIR="/var/backups/network_configs"

# Network profile templates
declare -A NETWORK_PROFILES=(
    ["corporate"]="security=WPA2Enterprise,proxy=auto,dns=corporate"
    ["guest"]="security=WPA2Personal,proxy=none,dns=public"
    ["secure"]="security=WPA2Enterprise,proxy=mandatory,dns=secure"
    ["development"]="security=WPA2Personal,proxy=bypass,dns=dev"
    ["public"]="security=none,proxy=auto,dns=public"
)

# DNS server configurations
declare -A DNS_CONFIGS=(
    ["corporate"]="10.0.1.1 10.0.1.2"
    ["public"]="8.8.8.8 8.8.4.4"
    ["secure"]="1.1.1.1 1.0.0.1"
    ["dev"]="192.168.1.1 8.8.8.8"
)

# Proxy configurations
declare -A PROXY_CONFIGS=(
    ["corporate_web"]="proxy.company.com:8080:authenticated"
    ["corporate_auto"]="http://proxy.company.com/proxy.pac"
    ["guest_web"]="guest-proxy.company.com:3128:none"
)

# Logging function
log_action() {
    echo "$(date '+%Y-%m-%d %H:%M:%S') - $1" | tee -a "$LOG_FILE"
}

# Setup directories
setup_directories() {
    for dir in "$CONFIG_DIR" "$PROFILES_DIR" "$POLICIES_DIR" "$BACKUP_DIR"; do
        if [[ ! -d "$dir" ]]; then
            mkdir -p "$dir"
            log_action "Created directory: $dir"
        fi
    done
}

# Backup current network configuration
backup_network_config() {
    local backup_timestamp
    backup_timestamp=$(date '+%Y%m%d_%H%M%S')
    local backup_file="$BACKUP_DIR/network_config_$backup_timestamp.tar.gz"
    
    log_action "Creating network configuration backup: $backup_file"
    
    # Create temporary backup directory
    local temp_backup="/tmp/network_backup_$$"
    mkdir -p "$temp_backup"
    
    # Export current settings
    {
        echo "# Wi-Fi Service Status"
        networksetup -getnetworkserviceenabled Wi-Fi
        
        echo -e "\n# Wi-Fi Power Status"
        networksetup -getairportpower en0
        
        echo -e "\n# Current Network"
        networksetup -getairportnetwork en0
        
        echo -e "\n# Network Info"
        networksetup -getinfo Wi-Fi
        
        echo -e "\n# DNS Servers"
        networksetup -getdnsservers Wi-Fi
        
        echo -e "\n# Search Domains"
        networksetup -getsearchdomains Wi-Fi
        
        echo -e "\n# Web Proxy"
        networksetup -getwebproxy Wi-Fi
        
        echo -e "\n# Secure Web Proxy"
        networksetup -getsecurewebproxy Wi-Fi
        
        echo -e "\n# Auto Proxy"
        networksetup -getautoproxyurl Wi-Fi
        
        echo -e "\n# Proxy Bypass Domains"
        networksetup -getproxybypassdomains Wi-Fi
        
    } > "$temp_backup/current_config.txt"
    
    # Create compressed backup
    if tar -czf "$backup_file" -C "$(dirname "$temp_backup")" "$(basename "$temp_backup")" 2>/dev/null; then
        log_action "✅ Network backup created: $backup_file"
        rm -rf "$temp_backup"
        echo "$backup_file"
        return 0
    else
        log_action "❌ Network backup failed"
        rm -rf "$temp_backup"
        return 1
    fi
}

# Configure DNS servers
configure_dns() {
    local dns_profile="$1"
    local custom_dns="$2"
    
    log_action "Configuring DNS servers: $dns_profile"
    
    local dns_servers
    if [[ -n "$custom_dns" ]]; then
        dns_servers="$custom_dns"
    else
        dns_servers="${DNS_CONFIGS[$dns_profile]}"
    fi
    
    if [[ -z "$dns_servers" ]]; then
        log_action "❌ Unknown DNS profile or empty configuration: $dns_profile"
        return 1
    fi
    
    # Set DNS servers
    if networksetup -setdnsservers Wi-Fi $dns_servers; then
        log_action "✅ DNS servers configured: $dns_servers"
        
        # Verify configuration
        local current_dns
        current_dns=$(networksetup -getdnsservers Wi-Fi)
        log_action "Current DNS servers: $current_dns"
        
        return 0
    else
        log_action "❌ Failed to configure DNS servers"
        return 1
    fi
}

# Configure search domains
configure_search_domains() {
    local domains="$*"
    
    if [[ -z "$domains" ]]; then
        log_action "Clearing search domains"
        networksetup -setsearchdomains Wi-Fi "Empty"
    else
        log_action "Setting search domains: $domains"
        networksetup -setsearchdomains Wi-Fi $domains
    fi
    
    if [[ $? -eq 0 ]]; then
        log_action "✅ Search domains configured successfully"
        return 0
    else
        log_action "❌ Failed to configure search domains"
        return 1
    fi
}

# Configure web proxy
configure_web_proxy() {
    local proxy_type="$1"
    local proxy_config="$2"
    
    log_action "Configuring web proxy: $proxy_type"
    
    case "$proxy_type" in
        "none")
            # Disable all proxies
            networksetup -setwebproxystate Wi-Fi off
            networksetup -setsecurewebproxystate Wi-Fi off
            networksetup -setautoproxystate Wi-Fi off
            log_action "✅ All proxies disabled"
            ;;
        "web")
            local proxy_server proxy_port auth_required username password
            IFS=':' read -ra PROXY_PARTS <<< "$proxy_config"
            proxy_server="${PROXY_PARTS[0]}"
            proxy_port="${PROXY_PARTS[1]}"
            auth_required="${PROXY_PARTS[2]}"
            username="${PROXY_PARTS[3]:-}"
            password="${PROXY_PARTS[4]:-}"
            
            if [[ "$auth_required" == "authenticated" && -n "$username" && -n "$password" ]]; then
                networksetup -setwebproxy Wi-Fi "$proxy_server" "$proxy_port" on "$username" "$password"
            else
                networksetup -setwebproxy Wi-Fi "$proxy_server" "$proxy_port" off
            fi
            
            networksetup -setwebproxystate Wi-Fi on
            log_action "✅ Web proxy configured: $proxy_server:$proxy_port"
            ;;
        "auto")
            networksetup -setautoproxyurl Wi-Fi "$proxy_config"
            networksetup -setautoproxystate Wi-Fi on
            log_action "✅ Automatic proxy configured: $proxy_config"
            ;;
        *)
            log_action "❌ Unknown proxy type: $proxy_type"
            return 1
            ;;
    esac
    
    return 0
}

# Configure proxy bypass domains
configure_proxy_bypass() {
    local domains="$*"
    
    log_action "Configuring proxy bypass domains: $domains"
    
    if [[ -n "$domains" ]]; then
        networksetup -setproxybypassdomains Wi-Fi $domains
    else
        networksetup -setproxybypassdomains Wi-Fi "Empty"
    fi
    
    if [[ $? -eq 0 ]]; then
        log_action "✅ Proxy bypass domains configured"
        return 0
    else
        log_action "❌ Failed to configure proxy bypass domains"
        return 1
    fi
}

# Deploy network profile
deploy_network_profile() {
    local profile_name="$1"
    local custom_settings="$2"
    
    log_action "Deploying network profile: $profile_name"
    
    # Get profile configuration
    local profile_config="${NETWORK_PROFILES[$profile_name]}"
    if [[ -z "$profile_config" ]]; then
        log_action "❌ Unknown network profile: $profile_name"
        return 1
    fi
    
    # Backup current configuration
    local backup_file
    backup_file=$(backup_network_config)
    
    # Parse profile settings
    local dns_setting proxy_setting security_setting
    IFS=',' read -ra SETTINGS <<< "$profile_config"
    
    for setting in "${SETTINGS[@]}"; do
        IFS='=' read -ra SETTING_PAIR <<< "$setting"
        local key="${SETTING_PAIR[0]}"
        local value="${SETTING_PAIR[1]}"
        
        case "$key" in
            "dns")
                configure_dns "$value"
                ;;
            "proxy")
                case "$value" in
                    "auto")
                        configure_web_proxy "auto" "${PROXY_CONFIGS[corporate_auto]}"
                        ;;
                    "mandatory")
                        configure_web_proxy "web" "${PROXY_CONFIGS[corporate_web]}"
                        ;;
                    "none")
                        configure_web_proxy "none"
                        ;;
                    "bypass")
                        configure_web_proxy "none"
                        configure_proxy_bypass "*.local *.company.com localhost"
                        ;;
                esac
                ;;
            "security")
                log_action "Security setting: $value (requires manual Wi-Fi connection)"
                ;;
        esac
    done
    
    # Apply custom settings if provided
    if [[ -n "$custom_settings" ]]; then
        log_action "Applying custom settings: $custom_settings"
        # Parse and apply custom settings here
    fi
    
    # Generate deployment report
    generate_profile_report "$profile_name" "$backup_file"
    
    log_action "✅ Network profile deployed: $profile_name"
    return 0
}

# Generate profile deployment report
generate_profile_report() {
    local profile_name="$1"
    local backup_file="$2"
    local report_file="$CONFIG_DIR/profile_report_$(date '+%Y%m%d_%H%M%S').json"
    
    log_action "Generating profile deployment report: $report_file"
    
    cat > "$report_file" << EOF
{
    "deployment_metadata": {
        "timestamp": "$(date -Iseconds)",
        "profile_name": "$profile_name",
        "hostname": "$(hostname)",
        "backup_file": "$backup_file",
        "generator": "Roundfleet Wi-Fi Manager"
    },
    "network_configuration": {
        "wifi_service_enabled": "$(networksetup -getnetworkserviceenabled Wi-Fi)",
        "wifi_power_status": "$(networksetup -getairportpower en0)",
        "current_network": "$(networksetup -getairportnetwork en0)",
        "dns_servers": "$(networksetup -getdnsservers Wi-Fi | tr '\n' ' ')",
        "search_domains": "$(networksetup -getsearchdomains Wi-Fi | tr '\n' ' ')",
        "web_proxy_state": "$(networksetup -getwebproxystate Wi-Fi)",
        "auto_proxy_state": "$(networksetup -getautoproxystate Wi-Fi)"
    },
    "system_info": {
        "os_version": "$(sw_vers -productVersion)",
        "build_version": "$(sw_vers -buildVersion)",
        "serial_number": "$(system_profiler SPHardwareDataType | grep 'Serial Number' | awk '{print $4}')",
        "wifi_hardware": "$(system_profiler SPAirPortDataType | grep 'Card Type' | awk -F': ' '{print $2}')"
    }
}
EOF

    log_action "✅ Profile deployment report generated: $report_file"
    echo "$report_file"
}

# Monitor network connectivity
monitor_connectivity() {
    local test_hosts=("8.8.8.8" "apple.com" "github.com")
    local connectivity_report="$CONFIG_DIR/connectivity_$(date '+%Y%m%d_%H%M%S').json"
    
    log_action "Starting connectivity monitoring"
    
    cat > "$connectivity_report" << EOF
{
    "monitoring_timestamp": "$(date -Iseconds)",
    "hostname": "$(hostname)",
    "connectivity_tests": [
EOF

    local first=true
    for host in "${test_hosts[@]}"; do
        if [[ "$first" == true ]]; then
            first=false
        else
            echo "," >> "$connectivity_report"
        fi
        
        local start_time end_time duration result
        start_time=$(date +%s.%N)
        
        if ping -c 3 -W 5000 "$host" >/dev/null 2>&1; then
            result="success"
        else
            result="failed"
        fi
        
        end_time=$(date +%s.%N)
        duration=$(awk "BEGIN {printf \"%.3f\", $end_time - $start_time}")
        
        cat >> "$connectivity_report" << EOF
        {
            "host": "$host",
            "result": "$result",
            "duration_seconds": $duration,
            "timestamp": "$(date -Iseconds)"
        }
EOF
        
        log_action "Connectivity test: $host - $result ($duration seconds)"
    done
    
    cat >> "$connectivity_report" << EOF
    ],
    "network_status": {
        "current_ssid": "$(networksetup -getairportnetwork en0 | cut -d' ' -f4- || echo 'Not connected')",
        "signal_strength": "$(airport -I | grep ' RSSI:' | awk '{print $2}' || echo 'N/A')",
        "ip_address": "$(ifconfig en0 | grep 'inet ' | awk '{print $2}' || echo 'N/A')"
    }
}
EOF

    log_action "✅ Connectivity monitoring completed: $connectivity_report"
    echo "$connectivity_report"
}

# Wi-Fi security scan
security_scan() {
    local scan_report="$CONFIG_DIR/security_scan_$(date '+%Y%m%d_%H%M%S').json"
    
    log_action "Starting Wi-Fi security scan"
    
    # Scan for available networks
    local available_networks
    available_networks=$(/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -s)
    
    cat > "$scan_report" << EOF
{
    "scan_timestamp": "$(date -Iseconds)",
    "hostname": "$(hostname)",
    "security_analysis": {
        "open_networks": [],
        "wep_networks": [],
        "wpa_networks": [],
        "enterprise_networks": []
    },
    "network_details": [
EOF

    # Parse networks and categorize by security
    echo "$available_networks" | tail -n +2 | while IFS= read -r line; do
        local ssid security
        ssid=$(echo "$line" | awk '{print $1}')
        security=$(echo "$line" | awk '{for(i=7;i<=NF;i++) printf "%s ", $i; print ""}' | sed 's/[[:space:]]*$//')
        
        if [[ -n "$ssid" && "$ssid" != "SSID" ]]; then
            echo "Found network: $ssid - Security: $security" >&2
        fi
    done
    
    cat >> "$scan_report" << EOF
    ]
}
EOF

    log_action "✅ Wi-Fi security scan completed: $scan_report"
    echo "$scan_report"
}

# Reset network configuration
reset_network_config() {
    local reset_type="${1:-partial}"
    
    log_action "Resetting network configuration: $reset_type"
    
    # Backup before reset
    backup_network_config
    
    case "$reset_type" in
        "dns")
            log_action "Resetting DNS configuration"
            networksetup -setdnsservers Wi-Fi "Empty"
            networksetup -setsearchdomains Wi-Fi "Empty"
            ;;
        "proxy")
            log_action "Resetting proxy configuration"
            networksetup -setwebproxystate Wi-Fi off
            networksetup -setsecurewebproxystate Wi-Fi off
            networksetup -setautoproxystate Wi-Fi off
            networksetup -setproxybypassdomains Wi-Fi "Empty"
            ;;
        "full")
            log_action "Performing full network reset"
            # Reset all network settings
            networksetup -setdnsservers Wi-Fi "Empty"
            networksetup -setsearchdomains Wi-Fi "Empty"
            networksetup -setwebproxystate Wi-Fi off
            networksetup -setsecurewebproxystate Wi-Fi off
            networksetup -setautoproxystate Wi-Fi off
            networksetup -setproxybypassdomains Wi-Fi "Empty"
            
            # Reset Wi-Fi interface
            networksetup -setairportpower en0 off
            sleep 2
            networksetup -setairportpower en0 on
            ;;
        *)
            log_action "Resetting DNS and proxy settings"
            networksetup -setdnsservers Wi-Fi "Empty"
            networksetup -setwebproxystate Wi-Fi off
            ;;
    esac
    
    log_action "✅ Network configuration reset completed"
    return 0
}

# Main execution function
main() {
    local action="${1:-status}"
    local profile_name="$2"
    local additional_param="$3"
    
    log_action "=== Roundfleet Wi-Fi Management Started ==="
    log_action "Action: $action"
    log_action "Profile: ${profile_name:-N/A}"
    
    # Setup
    setup_directories
    
    case "$action" in
        "deploy")
            if [[ -z "$profile_name" ]]; then
                echo "Available network profiles:"
                for profile in "${!NETWORK_PROFILES[@]}"; do
                    echo "  - $profile: ${NETWORK_PROFILES[$profile]}"
                done
                echo ""
                echo "Usage: $0 deploy <profile_name> [custom_settings]"
                exit 1
            fi
            deploy_network_profile "$profile_name" "$additional_param"
            ;;
        "status")
            network_diagnostics
            ;;
        "scan")
            security_scan
            ;;
        "monitor")
            monitor_connectivity
            ;;
        "dns")
            if [[ -z "$profile_name" ]]; then
                echo "Available DNS profiles: ${!DNS_CONFIGS[*]}"
                echo "Usage: $0 dns <profile_name|custom_servers>"
                exit 1
            fi
            configure_dns "$profile_name" "$additional_param"
            ;;
        "proxy")
            if [[ -z "$profile_name" ]]; then
                echo "Usage: $0 proxy <none|web|auto> [config]"
                exit 1
            fi
            configure_web_proxy "$profile_name" "$additional_param"
            ;;
        "reset")
            reset_network_config "$profile_name"
            ;;
        "backup")
            backup_network_config
            ;;
        *)
            echo "Usage: $0 {deploy|status|scan|monitor|dns|proxy|reset|backup}"
            echo "  deploy  - Deploy network profile"
            echo "  status  - Show network status and diagnostics"
            echo "  scan    - Perform Wi-Fi security scan"
            echo "  monitor - Monitor network connectivity"
            echo "  dns     - Configure DNS servers"
            echo "  proxy   - Configure proxy settings"
            echo "  reset   - Reset network configuration"
            echo "  backup  - Backup current network configuration"
            exit 1
            ;;
    esac
    
    log_action "=== Wi-Fi management completed ==="
}

# Execute main function
main "$@"

Advanced Network Configuration

Enterprise Wi-Fi Profile Management

#!/bin/bash

# Create custom network profile
create_network_profile() {
    local profile_name="$1"
    local ssid="$2"
    local security_type="$3"
    local proxy_config="$4"
    local dns_config="$5"
    
    local profile_file="$PROFILES_DIR/${profile_name}.json"
    
    cat > "$profile_file" << EOF
{
    "profile_name": "$profile_name",
    "created_date": "$(date -Iseconds)",
    "wifi_settings": {
        "ssid": "$ssid",
        "security_type": "$security_type",
        "auto_connect": true,
        "priority": 100
    },
    "proxy_settings": {
        "type": "$proxy_config",
        "auto_config_url": "",
        "manual_config": {
            "server": "",
            "port": "",
            "requires_auth": false
        },
        "bypass_domains": ["*.local", "localhost"]
    },
    "dns_settings": {
        "servers": "$dns_config",
        "search_domains": ["company.com", "local"]
    },
    "security_policies": {
        "require_certificate": false,
        "allow_untrusted": false,
        "minimum_security": "WPA2"
    }
}
EOF

    echo "Network profile created: $profile_file"
}

Automated Network Switching

#!/bin/bash

# Smart network switching based on location/SSID priority
smart_network_switching() {
    local priority_networks=("Corporate-WiFi" "Corporate-Guest" "Office-5G")
    local current_network
    current_network=$(networksetup -getairportnetwork en0 | cut -d' ' -f4-)
    
    echo "Current network: $current_network"
    echo "Scanning for priority networks..."
    
    # Get available networks
    local available_networks
    available_networks=$(/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -s | tail -n +2 | awk '{print $1}')
    
    # Check for priority networks
    for priority_ssid in "${priority_networks[@]}"; do
        if echo "$available_networks" | grep -q "$priority_ssid"; then
            if [[ "$current_network" != "$priority_ssid" ]]; then
                echo "Found higher priority network: $priority_ssid"
                echo "Would switch from: $current_network"
                # Note: Actual connection requires credentials
                return 0
            fi
        fi
    done
    
    echo "Already connected to optimal network"
}

Network Quality Monitoring

#!/bin/bash

# Monitor network quality and performance
monitor_network_quality() {
    local duration="${1:-60}"  # monitoring duration in seconds
    local interval="${2:-5}"   # check interval in seconds
    
    echo "=== Network Quality Monitoring ==="
    echo "Duration: ${duration}s, Interval: ${interval}s"
    
    local start_time end_time
    start_time=$(date +%s)
    end_time=$((start_time + duration))
    
    while [[ $(date +%s) -lt $end_time ]]; do
        local timestamp signal_strength link_quality tx_rate
        timestamp=$(date '+%H:%M:%S')
        
        # Get Wi-Fi metrics
        local airport_info
        airport_info=$(/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I)
        
        signal_strength=$(echo "$airport_info" | grep 'RSSI:' | awk '{print $2}')
        link_quality=$(echo "$airport_info" | grep 'link auth:' | awk '{print $3}')
        tx_rate=$(echo "$airport_info" | grep 'lastTxRate:' | awk '{print $2}')
        
        # Test connectivity speed
        local ping_time
        ping_time=$(ping -c 1 8.8.8.8 2>/dev/null | grep 'time=' | awk -F'time=' '{print $2}' | awk '{print $1}')
        
        printf "%s | Signal: %sdBm | Quality: %s | Speed: %sMbps | Ping: %s\n" \
               "$timestamp" "$signal_strength" "$link_quality" "$tx_rate" "${ping_time:-timeout}"
        
        sleep "$interval"
    done
}

Security and Compliance

Network Security Audit

#!/bin/bash

# Comprehensive network security audit
network_security_audit() {
    local audit_report="$CONFIG_DIR/security_audit_$(date '+%Y%m%d_%H%M%S').json"
    
    echo "=== Network Security Audit ==="
    log_action "Starting network security audit"
    
    cat > "$audit_report" << EOF
{
    "audit_timestamp": "$(date -Iseconds)",
    "hostname": "$(hostname)",
    "security_assessment": {
        "wifi_encryption": "$(networksetup -getairportnetwork en0 | grep -o 'WPA\\|WEP\\|None' || echo 'Unknown')",
        "proxy_enabled": "$(networksetup -getwebproxystate Wi-Fi)",
        "dns_servers": "$(networksetup -getdnsservers Wi-Fi | tr '\n' ',' | sed 's/,$//')",
        "firewall_status": "$(defaults read /Library/Preferences/com.apple.alf globalstate 2>/dev/null || echo 'Unknown')"
    },
    "vulnerability_checks": [
EOF

    # Check for open networks in range
    local open_networks
    open_networks=$(/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -s | grep -E 'NONE|--' | wc -l)
    
    # Check for weak DNS
    local dns_servers
    dns_servers=$(networksetup -getdnsservers Wi-Fi)
    
    # Generate security recommendations
    local recommendations=()
    
    if [[ "$open_networks" -gt 0 ]]; then
        recommendations+=("Avoid connecting to $open_networks open networks detected")
    fi
    
    if echo "$dns_servers" | grep -q "There aren't any DNS Servers"; then
        recommendations+=("Configure secure DNS servers")
    fi
    
    cat >> "$audit_report" << EOF
    ],
    "recommendations": [
EOF

    local first=true
    for rec in "${recommendations[@]}"; do
        if [[ "$first" == true ]]; then
            first=false
        else
            echo "," >> "$audit_report"
        fi
        echo "        \"$rec\"" >> "$audit_report"
    done
    
    cat >> "$audit_report" << EOF
    ]
}
EOF

    log_action "✅ Security audit completed: $audit_report"
    echo "$audit_report"
}

Compliance Policy Enforcement

#!/bin/bash

# Enforce enterprise compliance policies
enforce_compliance_policy() {
    local policy_name="$1"
    
    log_action "Enforcing compliance policy: $policy_name"
    
    case "$policy_name" in
        "corporate")
            # Corporate policy: Secure DNS, mandatory proxy, no open networks
            configure_dns "corporate"
            configure_web_proxy "web" "${PROXY_CONFIGS[corporate_web]}"
            configure_proxy_bypass "*.company.com localhost"
            ;;
        "education")
            # Education policy: Safe DNS, content filtering proxy
            configure_dns "public"
            configure_web_proxy "auto" "http://filter.school.edu/proxy.pac"
            ;;
        "healthcare")
            # Healthcare policy: HIPAA-compliant settings
            configure_dns "secure"
            configure_web_proxy "web" "secure-proxy.hospital.org:8080:authenticated"
            ;;
        "government")
            # Government policy: Maximum security
            configure_dns "secure"
            configure_web_proxy "web" "gov-proxy.agency.gov:3128:authenticated"
            configure_proxy_bypass ""  # No bypass domains
            ;;
        *)
            log_action "❌ Unknown compliance policy: $policy_name"
            return 1
            ;;
    esac
    
    log_action "✅ Compliance policy enforced: $policy_name"
    return 0
}

Network Troubleshooting

Automated Network Repair

#!/bin/bash

# Automated network troubleshooting and repair
network_repair() {
    local repair_level="${1:-basic}"
    
    log_action "Starting network repair: $repair_level"
    
    echo "=== Roundfleet Network Repair ==="
    
    # Basic connectivity test
    echo "🔍 Testing basic connectivity..."
    if ping -c 3 8.8.8.8 >/dev/null 2>&1; then
        echo "✅ Internet connectivity: OK"
    else
        echo "❌ Internet connectivity: FAILED"
        
        case "$repair_level" in
            "basic")
                echo "🔧 Attempting basic repair..."
                # Cycle Wi-Fi
                networksetup -setairportpower en0 off
                sleep 3
                networksetup -setairportpower en0 on
                sleep 5
                ;;
            "advanced")
                echo "🔧 Attempting advanced repair..."
                # Full network reset
                reset_network_config "full"
                sleep 10
                ;;
            "complete")
                echo "🔧 Attempting complete repair..."
                # Reset network preferences
                sudo rm -f /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
                sudo rm -f /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
                echo "⚠️  System restart required for complete repair"
                ;;
        esac
        
        # Retest after repair
        echo "🔄 Retesting connectivity..."
        if ping -c 3 8.8.8.8 >/dev/null 2>&1; then
            echo "✅ Repair successful"
            log_action "Network repair successful: $repair_level"
        else
            echo "❌ Repair failed - escalate to manual intervention"
            log_action "Network repair failed: $repair_level"
        fi
    fi
}

Network Performance Optimization

#!/bin/bash

# Optimize network performance settings
optimize_network_performance() {
    echo "=== Network Performance Optimization ==="
    
    # Check current MTU
    local current_mtu
    current_mtu=$(networksetup -getMTU Wi-Fi | awk '{print $NF}')
    echo "Current MTU: $current_mtu"
    
    # Optimize for different scenarios
    local optimization_type="${1:-balanced}"
    
    case "$optimization_type" in
        "throughput")
            echo "🚀 Optimizing for maximum throughput..."
            networksetup -setMTU Wi-Fi 1500
            ;;
        "latency")
            echo "⚡ Optimizing for low latency..."
            networksetup -setMTU Wi-Fi 1200
            ;;
        "balanced")
            echo "⚖️  Applying balanced optimization..."
            networksetup -setMTU Wi-Fi 1400
            ;;
        *)
            echo "❌ Unknown optimization type: $optimization_type"
            return 1
            ;;
    esac
    
    # Clear DNS cache
    echo "🧹 Clearing DNS cache..."
    sudo dscacheutil -flushcache
    sudo killall -HUP mDNSResponder
    
    echo "✅ Network optimization completed"
}

Best Practices

🚀 Performance Optimization

Monitor network quality regularly and switch to optimal networks
Configure appropriate MTU sizes for your network environment
Use local DNS caching to improve resolution speeds
Optimize proxy settings for your specific use case

🔐 Security Guidelines

Always use encrypted networks (WPA2/WPA3) in enterprise environments
Configure secure DNS servers to prevent DNS poisoning
Implement proxy policies for content filtering and security
Regular security audits to identify network vulnerabilities

📋 Management Best Practices

Profile-based configuration for different user groups and locations
Centralized policy enforcement across all fleet devices
Regular backup of network configurations before changes
Automated monitoring and alerting for connectivity issues

🔍 Troubleshooting Tips

Use network diagnostics to identify configuration issues
Monitor signal strength and network quality metrics
Test connectivity to multiple endpoints for comprehensive validation
Document network changes for audit trails and troubleshooting

Important Notes

Network changes take effect immediately but may require reconnection
Proxy authentication credentials should be managed securely
DNS changes may require cache flushing to take effect
Some enterprise networks require specific certificates for authentication
Always backup configurations before making significant changes

Tutorial

Important notice